38
willowpump.com
l text or call
1-888-WILLOW-3
4. RINSE FOR 20 SECONDS Rinse both parts thoroughly with hot water for 20
seconds (minimum). Visually inspect parts to ensure each is clean. If any signs
of residual milk, repeat cleaning process.
5. AIR DRY + STORE Place both parts on clean paper towel or drying rack and
allow to air dry. For best results: avoid using cloth towels; store dry parts in
clean, cool place; do not store wet or damp parts. To maintain cleanliness, avoid
touching inside of parts.
IMPORTANT:
Take care not to damage parts when cleaning. Replace
Flange, Flextube
™
and/or Cleaning Brushes after signs of excessive wear.
Replace Flange and Flextube™ every 3 months.
fig 5d
Insert small
brush into Tip at
bottom and clean.
fig 5c
Use small
brush to clean inside
top opening and
area under Collar.
Summary of Contents for Breast Pump Generation 3
Page 63: ...IFU 1014 A...
