Wilo VeroLine-IPS 20, Installation And Operating Instructions Manual

English

20

WILO SE 11/2013

Information that appears directly on the product, such as:

• Direction of rotation arrow,
• Rating plate
• Warning sticker

Must be strictly complied with and kept in legible condition.

2.2

Personnel qualifications

The installation, operating and maintenance personnel must have the 
appropriate qualifications for this work. Area of responsibility, terms 
of reference and monitoring of the personnel are to be ensured by the 
operator. If the personnel are not in possession of the necessary 
knowledge, they are to be trained and instructed. This can be accom-
plished if necessary by the manufacturer of the product at the request 
of the operator.

2.3

Danger in the event of non-
observance of the safety 
instructions

Non-observance of the safety instructions can result in risk of injury 
to persons and damage to the environment and the product/unit. 
Non-observance of the safety instructions results in the loss of any 
claims to damages.

In detail, non-observance can, for example, result in the following 
risks:

• Danger to persons from electrical, mechanical and bacteriological 

influences

• Pollution of the environment due to leakage of hazardous materials
• Damage to property
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures

2.4

Safety consciousness on the job

The safety instructions included in these installation and operating 
instructions, the existing national regulations for accident prevention 
together with any internal working, operating and safety regulations 
of the operator are to be complied with.

2.5

Safety instructions for the operator

This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible 
for their safety or where they receive instructions from such a person 
as to how the device is to be operated. 

Children should be supervised to ensure that they do not play with the 
appliance.

• If hot or cold components on the product/the unit lead to hazards, 

local measures must be taken to guard them against touching.

• Guards protecting against touching moving components (such as the 

coupling) must not be removed whilst the product is in operation. 

• Leakages (e.g. from a shaft seal) of hazardous fluids (e.g. explosive, 

toxic or hot) must be conveyed away so that no danger to persons or 
to the environment arises. National statutory provisions are to be 
complied with.

• Danger from electrical current must be eliminated. Local directives or 

general directives [e.g. IEC, VDE etc.] and local energy supply compa-
nies must be adhered to.

• The area near the pump unit must be kept free of contaminants to 

eliminate the chance of a fire or an explosion due to contact of con-
taminants with hot unit surfaces.

• The instructions in this manual apply to the standard equipment 

design. This book does not discuss all details or frequent deviations. 
Additional information is available from the manufacturer.

• If there are any doubts about the function or setting of parts of the 

equipment, contact the manufacturer immediately.