English
Installation and operating instructions Wilo-VeroLine-IPS
21
2.6
Safety instructions for inspection
and installation work
The operator must ensure that all installation and maintenance work
is carried out by authorised and qualified personnel who are suffi-
ciently informed from their own detailed study of the operating
instructions.
Work to the product/unit must only be carried out when at a standstill.
It is mandatory that the procedure described in the installation and
operating instructions for shutting down the product/unit are com-
plied with.
Immediately on conclusion of the work, all safety and protective
devices must be put back in position and/or recommissioned.
2.7
Unauthorised modification and
manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair
the safety of the product/personnel and will make void the manufac-
turer's declarations regarding safety.
Modifications to the product are only permissible after consultation
with the manufacturer. Original spare parts and accessories author-
ised by the manufacturer ensure safety. The use of other parts will
absolve us of liability for consequential events.
2.8
Improper use
The operating safety of the supplied product is only guaranteed for
conventional use in accordance with Chapter 4 of the operating
instructions. The limit values must on no account fall under or exceed
those specified in the catalogue/data sheet.
3
Transport and interim storage
3.1
Shipping
The pump is enclosed in a box or lashed to a pallet ex works and is pro-
tected against dirt and moisture.
Transport inspection
On arrival, inspect the pump immediately for any transport damage. If
damage is detected, the necessary steps involving the forwarding
agent must be taken within the specified period.
Storage
Before installation and/or during interim storage, the pump must be
kept dry, frost-free and protected from mechanical damage.
CAUTION! Risk of damage due to incorrect packaging!
If the pump is transported again at a later time, it must be packaged
so that it cannot be damaged during transport.
• Use the original packaging for this, or choose equivalent packag-
ing.
3.2
Transport for installation/
dismantling purposes
WARNING! Risk of injury due to the weight of the pump!
Improper transport can lead to personal injury.
The pump itself and pump parts can be extremely heavy. Falling
parts pose a risk of cuts, crush injuries, bruises or impacts, which
may lead to death.
• Always use suitable lifting equipment and secure parts against fall-
ing.
• Never stand underneath a suspended load.
• Wear protective clothing for all work (safety shoes, helmet, pro-
tective gloves and protective goggles).
Summary of Contents for VeroLine-IPS 20
