background image

48

 

a

l e x i a

 V i

n s Ta l l aT i o n

 

a n d

 C

a r e

 g

u i d e

Section 7—Warranty Details

Limited Warranty

Limited Warranty

Subject to the conditions set forth herein, Wilson Audio warrants its electronics to be free of manufacturing defects in 

Subject to the conditions set forth herein, Wilson Audio warrants its electronics to be free of manufacturing defects in 

material and workmanship for the Warranty Period. The Warranty Period is a period of 90 days from the date of purchase by the 

material and workmanship for the Warranty Period. The Warranty Period is a period of 90 days from the date of purchase by the 
original purchaser, or if both of the following two requirements are met, the Warranty Period is a period of five (5) years from the 

original purchaser, or if both of the following two requirements are met, the Warranty Period is a period of five (5) years from the 
date of purchase by the original purchaser:

date of purchase by the original purchaser:

Requirement No. 1. No later than 30 days after product delivery to the customer, the customer must have returned the Warranty Registration Form to 

Requirement No. 1. No later than 30 days after product delivery to the customer, the customer must have returned the Warranty Registration Form to 
Wilson Audio. Alternatively, the warranty may be filled out on Wilson Audio’s website.

Wilson Audio. Alternatively, the warranty may be filled out on Wilson Audio’s website.

Requirement No. 2. The product must have been professionally installed by the Wilson Audio Dealer that sold the product to the customer. 

Requirement No. 2. The product must have been professionally installed by the Wilson Audio Dealer that sold the product to the customer. 

FAILURE TO COMPLY WITH EITHER REQUIREMENT NO. 1 OR REQUIREMENT NO. 2 WILL RESULT IN THE WARRANTY PERIOD 

FAILURE TO COMPLY WITH EITHER REQUIREMENT NO. 1 OR REQUIREMENT NO. 2 WILL RESULT IN THE WARRANTY PERIOD 

BEING LIMITED TO A PERIOD OF 90 DAYS ONLY. 

BEING LIMITED TO A PERIOD OF 90 DAYS ONLY. 

Conditions

Conditions

This Limited Warranty is also subject to the following conditions and limitations. The Limited Warranty is void and inap-

This Limited Warranty is also subject to the following conditions and limitations. The Limited Warranty is void and inap-

plicable if the product has been used or handled other than in accordance with the instructions in the owner’s manual, or has 

plicable if the product has been used or handled other than in accordance with the instructions in the owner’s manual, or has 
been abused or misused, damaged by accident or neglect or in being transported, or if the product has been tampered with or 

been abused or misused, damaged by accident or neglect or in being transported, or if the product has been tampered with or 
service or repair of the product has been attempted or performed by anyone other than Wilson Audio, an authorized Wilson Audio 

service or repair of the product has been attempted or performed by anyone other than Wilson Audio, an authorized Wilson Audio 
Dealer Technician or a service or repair center authorized by Wilson Audio to service or repair the product. Contact Wilson Audio 

Dealer Technician or a service or repair center authorized by Wilson Audio to service or repair the product. Contact Wilson Audio 
at 1(801) 377-2233 for information on location of Wilson Audio Dealers and authorized service and repair centers. Most repairs can 

at 1(801) 377-2233 for information on location of Wilson Audio Dealers and authorized service and repair centers. Most repairs can 
be made in the field. In instances where return to Wilson Audio’s factory is required, the Dealer or customer must first obtain a re-

be made in the field. In instances where return to Wilson Audio’s factory is required, the Dealer or customer must first obtain a re-
turn authorization. Purchaser must pay for shipping to Wilson Audio, and Wilson Audio will pay for shipping of its choice to return 

turn authorization. Purchaser must pay for shipping to Wilson Audio, and Wilson Audio will pay for shipping of its choice to return 
the product to purchaser. A RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT. Wilson Au-

the product to purchaser. A RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT. Wilson Au-
dio reserves the right to modify the design of any product without obligation to purchasers of previously manufactured products 

dio reserves the right to modify the design of any product without obligation to purchasers of previously manufactured products 
and to change the prices or specifications of any product without notice or obligation to any person.

and to change the prices or specifications of any product without notice or obligation to any person.

Remedy

Remedy

In the event that the product fails to meet the above Limited Warranty and the conditions set forth herein have been met, 

In the event that the product fails to meet the above Limited Warranty and the conditions set forth herein have been met, 

the purchaser’s sole remedy under this Limited Warranty shall be to: (1) contact an authorized Wilson Audio Dealer within the War-

the purchaser’s sole remedy under this Limited Warranty shall be to: (1) contact an authorized Wilson Audio Dealer within the War-
ranty Period for service or repair of the product without charge for parts or labor, which service or repair, at the Dealer’s option, 

ranty Period for service or repair of the product without charge for parts or labor, which service or repair, at the Dealer’s option, 
shall take place either at the location where the product is installed or at the Dealer’s place of business; or (2) if purchaser has 

shall take place either at the location where the product is installed or at the Dealer’s place of business; or (2) if purchaser has 
timely sought service or repair and the product cannot be serviced or repaired by the Dealer, then purchaser may obtain a return 

timely sought service or repair and the product cannot be serviced or repaired by the Dealer, then purchaser may obtain a return 
authorization from Wilson Audio and at purchaser’s expense return the product to Wilson Audio where the defect will be rectified 

authorization from Wilson Audio and at purchaser’s expense return the product to Wilson Audio where the defect will be rectified 
without charge for parts or labor.

without charge for parts or labor.

A u t h e n t i c   E x c e l l e n c e

Summary of Contents for Alexia V



















































Reviews: