background image

The surface finishes applied to the A.C.T. One Loudspeakers do not require anything 
other than the occasional dusting. Treat the driver cones with respect and they will last a 
decade with relative ease. 
The appearance of stains as a result of the inconsiderate placing of a glass is of course 
impossible. 
With a little care the speakers will look as good in ten years as they do today and will 
probably sound even better!   
 
 
 

Other Adjustments

 

 
Under no circumstance should you make any adjustments to the systems parts. Any 
adjustments not described above as required by the setting up procedure will nullify all 
guarantees. 
 
Should there be any question regarding the performance of this system you should refer 
to your dealer immediately for advice and or assistance. If in the unlikely event that the 
problem cannot be dealt with by your dealer, do not under any circumstances return the 
goods to Wilson Benesch without prior consultation with Wilson Benesch. Wilson 
Benesch will not accept any liability for costs incurred by the owner for goods returned 
without prior notification through the dealer. Wilson Benesch will not accept 
responsibility for any damage that might occur to the speakers during shipment unless it 
is by prior notice through the dealer. 
 

 
 
 
 

 
 
 
 
 
 
 
 
 

Summary of Contents for Act










Reviews: