1
Inside this Package
General
Your new Wilson Electronics signal booster has been carefully engineered to significantly improve
the performance of your iPhone* in mobile applications . Together with an outside antenna, the
signal booster’s state-of-the-art circuitry is designed to increase your iPhone* signal to and from the
cell tower, up to 20 times greater than the iPhone* alone . The iBooster reduces disconnects and
dropouts and increases data communication rates on 2G and 3G networks .
How it Works
The roof mounted outside antenna collects the cell tower signal and sends it through its cable to the
signal booster located inside the cradle . The signal is then boosted and sent to the iPhone* via the
built-in antenna inside the cradle/signal booster . When the iPhone* transmits, the signal is picked up
by the antenna inside the cradle, boosted by the signal booster and broadcast back to the cell tower
via the roof mounted outside antenna .
In addition to the convenient mini magnetic roof mount antenna included with your kit, Wilson
Electronics offers a wide variety of outside antennas to help you customize your signal booster for a
specific application . All models shown below double the power to the cell tower compared to the mini-
magnet antenna . See your dealer or visit
www.WilsonElectronics.com.
iBooster Wireless
Signal Booster/Cradle
Mini-Magnet Mount
antenna
vehicle power adapter
Vehicle Dash
Mounting Brackets
A)
The iBooster achieves the best performance while the iPhone
*
remains in the cradle and a Bluetooth
®
headset is used .
B)
When the iBooster is dash mounted, the iPhone
*
can be removed and
still maintain good amplification from a distance of up to 2 feet .
maximum distance of 2 feet from
dash mounted cradle
A
B
iPhone
*
case
adapter
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com Hours: 7 am to 6 pm MST.
