background image

Contents:

How it Works   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1 
Before Getting Started  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Quick Installation Overview   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Installing the Outside Antenna  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Installing the Low-Profile Antenna   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Installing a Wilson Electronics Signal Booster .  .  .  .  .  .  .  .  .  . 3
Powering Up a Wilson Electronics Signal Booster    .  .  .  .  .  . 3 
Understanding the Signal Booster Lights    .  .  .  .  .  .  .  .  .  .  .  .  . 4
Warnings and Recommendations   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Guarantee and Warranty   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Signal Booster Specifications   .  .  .  .  .  .  .  .  .  .  .  .  .  .Back Cover

Note:  

This manual contains important safety and operating information . 

Please read and follow the instructions in this manual . Failure to 

do so could be hazardous and result in damage to your Signal 

Booster .

Mobile 4G

Smart Technology   

Signal Booster

Appearance of device and accessories may vary .

Summary of Contents for 460008









Reviews: