background image

In-Building

Wireless

Smart Technology

Signal Booster

Contents:

Antenna Options and Accessories. . . . . . . . . . . . . . . . . . . 1

Before Getting Started / How It Works  . . . . . . . . . . . . . . . 2

Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing a Wilson Electronics Outside Antenna . . . . . . . . 4

Installing a Wilson Electronics Inside Antenna  . . . . . . . . . 5

Installing a Wilson Electronics Signal Booster. . . . . . . . . . 6

Powering Up a Wilson Electronics Signal Booster  . . . . . . 7

Understanding the Signal Booster Lights  . . . . . . . . . . 8-10

Warnings and Recommendations . . . . . . . . . . . . . . . . . . 11

Factor Conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Distance Coverage Chart  . . . . . . . . . . . . . . . . . . . . . . . . 13

Guarantee and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 14

Signal Booster Specifications . . . . . . . . . . . . . .Back Cover

Wilson

®

         Electronics, Inc.

Note:  

This manual contains important safety and operating information. 

Please read and follow the instructions in this manual. Failure to do so 

could be hazardous and result in damage to your signal booster.

Appearance of device and accessories may vary.

Summary of Contents for 801105

















Reviews: