5
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
6
Installing a Wilson Electronics Inside Antenna
Select a suitable location for the Inside Antenna, preferably in the center of where the signal
needs to be amplified. To determine signal strength and coverage distance, refer to page
12 of this installation guide.
Follow the specific antenna installation instructions included with the Inside Antenna.
Wilson Electronics has several Inside Antenna options. The dome and Panel Antennas are
the most popular for in-building applications.
For a square room, a Dome Antenna will provide better coverage. (A)
For a rectangular room, a Panel Antenna will provide better coverage. (B)
In some cases, multiple Inside Antennas may be required (C & D). A signal may be “split”
by using a splitter. If using more than one Inside Antenna, a separation of at least 20 feet is
necessary between Inside Antennas.
Connect the cable from the Signal Booster to the Inside Antenna. For distances of 20 feet or
more, use Wilson 400 low loss cable to prevent significant signal loss.
= Dome Antenna
= Panel Antenna
= Splitter
= Signal Booster
A
B
C
D
Warning:
An Inside Antenna must have a separation distance from all persons that is
at least 12 inches for the 5.2 dBi Dome Antenna and 15 inches for the
7 dBi Panel Antenna.
Splitter Options:
2-way
(859957)
(sold separately)
3-way
(859980)
4-way
(859981)
