background image

Limited Warranty

WARRANTY COVERAGE

Wilson Sporting Goods Co. (“Wilson”) warrant to the original purchaser that the Baiardo stringing machine (“Equipment”) 
purchased is free from defects in materials and workmanship for a period of fi ve (5) years from the date of original 
purchase for puller, height and tilt motors & sensors and for a period of three (3) years from the date of original purchase 
for all other parts (“Warranty Period”).  Should any defects covered by this warranty develop under normal use within the 
Warranty Period, Wilson will at its option, replace parts, repair or replace the defective Equipment.  If a parts defect arises 
and a valid claim is received within the Warranty Period, at is option Wilson will either exchange the part with a new, used 
or refurbished part that is at least functionally equivalent to the original part.  A replacement part assumes the remaining 
warranty of the original purchase or ninety (90) days from the date of replacement, whichever provides longer coverage 
for you.  This warranty does not apply to any damage or defect caused by negligence, abuse, misuse, unauthorized 
alternation, corrosive environments, moisture, high voltage surges from external sources, shipping, handling, or part wear 
and tear as a result of normal use.  Any parts or boards removed in the replacement or remanufacture process shall 
become the property of Wilson.   This warranty is extended to the original end user purchaser only and is not assignable 
or transferable to any other party.  

Routine maintenance, adjustment, and cleaning are required to ensure proper operation and are the responsibility 
of the purchaser and are not covered under the terms of this warranty. 

Wilson’s obligation under this warranty is limited to replacement parts repair or replacement of defective Equipment, and 
no one is authorized to promise any other liability or warranty.  Wilson will not be liable to you or anyone else for any 
damages that result from the failure of this Equipment or from the breach of any express or implied warranties including, 
without limitation, damage to other equipment, lost profi ts, or consequential, incidental, or punitive damages.  In no 
event will Wilson be liable for any amount greater than the currently suggested retail price of this Equipment.  The written 
warranty represents the entire warranty regarding this Equipment.  This warranty is given in lieu of all other warranties, 
express or implied, including without limitation implied warranties of merchantability and fi tness for a particular purpose.  
This warranty is limited to the Warranty Period.  No warranties, either express or implied, will apply after the Warranty 
Period.  This warranty gives you specifi c legal rights and you may also have other rights, which vary, from state to state.  
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 

OBTAINING WARRANTY SERVICE AND PARTS

Please review this manual or the online help resources referred to in this documentation posted at www.wilson.com/
baiardo before seeking warranty service. If the part is still not functioning properly after making use of these resources, 
please contact your local Wilson customer service representative for replacement part or Equipment. Additional contact 
information can be found in the contact section www.wilson.com/baiardo. Only Wilson customer service or a Wilson 
authorized service center can determine whether the part or Equipment is covered by this warranty and if covered will 
assist in providing warranty service. Wilson has the right to use a 3rd party to perform repair service in lieu of shipping 
and returning a machine for replacement.

Warranty service applies to parts that are tendered or presented for service during the Warranty Period as permitted by 
law. Subject to applicable law you will be required to furnish proof of purchase details before receiving warranty service 
(NOTE: Proof of purchase from auction sites such as ebay, uBid, Overstock, etc. will not be accepted, as this warranty 
does not apply to Equipment purchased from such auction sites). Warranty service may be restricted to the country 
where purchased. Service options, parts availability and response times will vary according to country and you may be 
responsible for shipping and handling charges if the part cannot be serviced in the country it is in. Wilson reserves the 
right to change this warranty without prior written notice.

EUROPEAN CONFORMITY

This product is in conformity with the provisions of the following: CENELEC EN 55014-1 2000/10/01, CENELEC EN 
55014-2 2001/12/01, BSI BS EN 61000-3-2 2006/5/31, and CENELEC EN 61000-3-3 of the EMC Directive

CENELEC EN 60335-1 of the Low Voltage Directive.

The Technical Construction File required by these Directives are maintained at the corporate headquarters 
of Wilson Sporting Goods Co., Chicago , IL 60631

11 

WARRANTY

Wilson Sporting Goods Co., 8750 W Bryn Mawr Avenue, 
Chicago, IL 60631, USA 
• Amer Sports Europe Services GmbH, Hainbuchenring 9,
  D - 82061 Neuried, Germany
• W and Wilson are registered trademarks 
  of Wilson Sporting Goods Co. 
• Baiardo and B.E.S.T. are trademarks 
  of Wilson Sporting Goods Co.
• The Australian Open name and logo are registered 
  trademarks of Lawn Tennis Association of Australia  
 Limited.
• Sony Ericsson is a registered trademark of Sony Ericsson 
  Mobile Communications Company 
• WTA Tour is a registered trademark of the WTA Tour Inc.
• US Open and USTA are registered trademarks of the 
  United States Tennis Association Incorporated.
• Trademarks advertised other than those of Wilson 
  Sporting Goods Co. are properties of their respective 
 companies. 
• Patents Pending

© 2009 Wilson Sporting Goods Co. 09-0271/03.09

Summary of Contents for BAIARDO





















Reviews: