Rev 1 PAGE
4
1.
PURPOSE OF THE BD800AM-M
The BD800AM-M Bi-Directional Amplifier/Repeater greatly improves RF coverage
for areas in which low signal strength or no signal is a problem when using your
portable AMPS phone inside the car.
2.
HOW THE BD800AM-M FUNCTIONS
The signal is received by the outside antenna from the cell site. It is then
AMPLIFIED/REPEATED and transmitted to your AMPS phone through the inside
antenna. When the phone transmits it is received by the inside antenna. It is then
AMPLIFIED/REPEATED and transmitted to the cell site through the outside antenna.
3.
FEATURES
Wireless Operation - No Physical Connection to Cellphone
The BD800AM-M Amplifier / Repeater greatly improves signal strength inside a
vehicle without a physical connection to your phone. It also allows multiple phones to
be used simultaneously.
Advanced Electronics Receive & Transmit Better Than Your Cellphone
The Wilson Cellular Amplifier / Repeater has a better receiver than what's in your
cellphone. Its advanced electronics are very sensitive and able to receive small signals
that would go undetected by most cellphones. It also has a better transmitter with
double the power of your cellphone. This allows your voice to be heard by distant cell
sites, increasing coverage up to 50 miles or more.
4.
AMPLIFIER SPECIFICATIONS
Frequency…….……………...824-849 MHz Uplink 869-894 MHz Downlink
Gain………………………….37dB Uplink 37dB Downlink
Flatness………………………+/- 3dB Uplink +/- 3dB Downlink
Max RF Output Power…
……
.+31dBm Uplink +15dBm Downlink
Noise Figure………………
…
.5dB Uplink 5dB Downlink
Uplink Downlink Isolation..
.…
More than 90dB
Power Consumption………….12V, 1.5A
Connecter………………
…
…..FME-Male 50 Ohms
Dimensions…………………..5.5 x 4.3 x 1.4 (inches) OR 14.0 x 10.8 x 3.5 (cm)
Weight…………………….
…
.1.32 pounds or 600 grams
Model #………………………BD800AM-M
Part #…………………….
…..
. 801101
Summary of Contents for BD800AM-M
Page 3: ...Rev 1 PAGE 3 ...
