background image

Amplifier

Installation

Guide

 

SIGNALBOOST

C-Booster

 

for  

BlackBerry

®

 Curve

™*

 

Dual-Band Wireless 

Cellular / PCS Amplifier with Built-in Antenna for the Curve

Part # 805206  Model # 271220  FCC ID: PWO271220SA  IC: 4726A-271220SA**

Wilson

®

         Electronics, Inc.

 Warning: 

This manual contains important safety 

and operating information. Please read and follow the 

instructions in this manual. Failure to do so could be 

hazardous and result in damage to your amplifier.

 *  Curve is a registered trademark of Research In Motion 

Limited, Inc.

**  The term “IC” before the certification number only signifies 

that Industry Canada technical specifications were met. 

A)

  The C-Booster achieves the best performance while the Curve

*

 remains in 

the cradle and a Bluetooth headset is used. 

B)

  When the C-Booster

 is dash mounted, the Curve

*

 can be removed and still 

maintain good amplification from a distance of up to 2½ feet.  

 

C-Booster

   BlackBerry®* Curve™* Signal Booster

*Trademark of RIM Ltd., Corp.

maximum distance of 2½ feet from 

dash mounted cradle

A

B

How it Works  · · · · · · · · · · · · · · · · · · · · · · · 1 

Install Diagrams - Vehicle 

 · · · · · · · · · · · · · · · · · · · · · ·

 2

Powering Up a Wilson Amplifier · · · · · ·

 · · ·

 · · · · · ·  · · 4

Understanding the Amplifier Lights  · · · · · · · · · · · · · · 4

Warnings and Recommendations · · · ·

 

 · Back Cover

About Wilson Electronics  · · · · · ·

 

 · · · · · Back Cover

Amplifier Specifications · · · · · · · · · · · · · Back Cover

Contents:

wpsantennas.com

1-877-594-5766

wpsantennas.com

1-877-594-5766

Summary of Contents for SIGNALBOOST C-Booster









Reviews: