5
Installing a Wilson Outside Antenna in a Building
Follow the specifi c antenna instructions included with the outside antenna (sold separately except for certain kits). These
instructions assume that you are using a Wilson magnet-mount or mini magnet-mount antenna and the optional suction-
cup window bracket.
To receive the best signal, select a window on the side of your building where your outside signal is the strongest.
Attach the suction-cup bracket to the inside of a window so that the cable
will reach the amplifi er location. Place the bracket as high on the window as
possible for best performance.
Once the bracket is in place, attach the magnet base of the antenna to the
fl at surface of the bracket. Note: the antenna must be installed vertically.
Signal performance will be degraded if the antenna is not vertical.The
antenna cable is small enough to easily tuck under the door seal or plastic
molding.
The Wilson U-Booster™ may be placed in any convenient indoor location, such as a desk or tabletop. The cell phone must be in the
cradle and a Bluetooth® headset used for voice communications.
Attaching the Antenna
Once you have selected the location for the U-Booster™, run the cable from the outside antenna and attach it to
the SMA connector on the bottom of the U-Booster™. Note: the U-Booster™ and the outside antenna must have a
minimum separation of 8 feet to prevent oscillation.
Installing the Wilson U-Booster Amplifi er in a Building
5
Building Installation
Suction cup Antenna Window Mount -not included-
Available from Wilson Electronics.
www.wilsonelectronics.com or call 800-204-4104
