PRO 1000C
IN-BUILDING CELL SIGNAL AMPLIFIER WITH REMOTE MONITORING
13
If you don’t already have a WilsonPro Cloud™ account at cloud.wilsonpro.com,
call 1-888-923-4448, Monday-Friday 8am-5pm MT so that your account can be
created. Once your account is set up, you can then add multiple customers,
locations, and amplifi ers.
Your supported amplifi ers can be added and managed via our WilsonPro Cloud
website located at
https://cloud.wilsonpro.com
. Simply log in using your email
address and password.
Pro 1000C connects to WilsonPro Cloud via the internet, through a traditional RJ-45
“hardwired” Ethernet connection or via LTE connection through the outside donor
antenna. The default setting is “Ethernet Preferred” (gives priority to Ethernet, but
will switch to LTE if Ethernet is not connected). NOTE: The LTE modem and SIM card
are installed and activated at the WilsonPro factory.
WilsonPro Cloud
Logging into the WilsonPro Cloud via Ethernet
The fi rst cloud-based platform for remote
monitoring & control of cellular signal amplifi ers.