Note:
The operate of resetting WDC-300's includes the followings:
1.
ABS zero
2.
INC zero
3.
The Resolution of X-axis and Y-axis are 1µ, the Resolution of Q-axis is 10µor 0.01°, Linear Compensation
value is 0.000000, the prescale coefficient is 1.000000.
4.
The printer port is Centronic, the Baud Rate of RS232 is 9600bps, the angle display format is DD Angle, and
the measurement mode is Backward Annotation.
5.
The X-axis and Y-axis are of linear compensation mode.
6.
All features and user programs are clear.
7.16
S
ETTING UP AXES
'
ENCODER RESOLUTION
Example:
Set the resolution of X-axis to 5µ
Operating steps:
1. Enter setup status;
2. Press
or
to browse function list until "Super…" is displayed in the message
window;
3. Press
ENTER
, then "Password:" is displayed in the message window;
4. Enter the password: 332
5. Press
ENTER
;
6. Press
or
to browse function list until "Encoder Res …" is displayed in the
message window;
7. Press
ENTER
, then "X Resolution? " is displayed in the message window;
8. Press
or
to browse function list until "X Resolution
" is displayed in the
message window;
9. Press
ENTER
, then "Value: 0. 001000" is displayed in the message window;
10. Press
0 . 0 0 5
to input new resolution for X axis ;
11. Press
ENTER
, confirm new resolution for X axis, then program will return the "X
Resolution" function list.
Note:
(1) If user want to set the Encoder Resolution of Y-axis and Q-axis, please repeat the above steps, and in step 8
press or until "Y Resolution ? " or "Q Resolution ? " is displayed in the message window.
(2) The Encoder Resolution range of X-axis and Y-axis are from 0.1µto 10µ(0.0001, 0.0002, 0.0005, 0.001, 0.002,
0.005, 0.01). The resolution of Q-axis is from 0.0001°to 0.1°or from 0.1µ to 100µ.
7.17
S
ETTING UP COMPENSATION MODE
Example:
Set X-axis nonlinear compensation mode
Operating steps:
1. Enter setup status;
2. Press
or
to browse function list until "Super…" is displayed in the message
window;
3. Press
ENTER
, then "Password:" is displayed in the message window;
4. Enter the password: 332
5. Press
ENTER
;
6. Press
or
to browse function list until "Compensation…" is displayed in the
message window;
7. Press
ENTER
, then "X Linear Comp." is displayed in the message window;
8. Press
or
to browse function list until "X Segment Comp." is displayed in the
message window;
9. Press
ENTER
, then "vSegment Comp." is displayed which mean that you have
selected nonlinear compensation mode.
Manual WDC-300
41
Summary of Contents for WDC-300
Page 1: ...Manual WDC 300 COUNTER FOR WPP 300 ...
Page 54: ...W03 134 ...