Note:
(1)
The calculation of prescale coefficient:
displayed value
Presales coefficient=-----------------------------------------
actual value
7.22 S
ETTING UP PRINTER PORT
Example:
Set printer port as RS232 interface
Operating steps:
1. Enter setup status;
2. Press
or
to browse function list until "Printer I/F" appears in the message
window;
3. Press
ENTER
, then "Centronic" appears in the message window;
4. Press
or
to browse function list until "RS232" appears in the message window;
5. Press
ENTER
, then "vRS232" appears which mean that you have selected this item.
Note:
(1) The default printer port is Centronic.
(2) If you want to set the printer port as Centronic interface, in step 4, you should browse the function list until
"Centronic" appears in the message window.
7.23 S
ETTING UP
RS232
FORMAT
Example:
Set up the transmit mode to pack BCD format.
Operating steps:
1.
Enter setup status;
2.
Press
or
to browse function list until "Super…" appears in the message
window;
3.
Press
ENTER
, then "Password:" appears in the message window;
4. Enter the correct password "332".
5. Press the
ENTER
key.
6.
Press
or
to browse function list until "RS232 FORMAT…" appears in the
message window;
7. Press
ENTER
key.
8. Press
or key until LED display "Pack BCD Code".
9.
Press
ENTER
, then "v" appears at left of LED window, it means that you have
selected the pack BCD format.
Note:
(1) If you want to set to ASCII format, just repeat above steps, and in step 8 select "ASCII Character".
(2) In step 9, you will finish setting.
44
Manual WDC-300
Summary of Contents for WDC-300
Page 1: ...Manual WDC 300 COUNTER FOR WPP 300 ...
Page 54: ...W03 134 ...