background image

  

© by WilTec Wildanger Technik GmbH  

 

Seite 18  

http://www.WilTec.de 
http://www.aoyue.eu

 

Version 3.2016

 

http://www.teichtip.de 

 

Disposal regulations 

 
 
EU  guidelines  regarding  the  disposal  of  scrap  electric  appliances  (WEEE,  2002/96/EC)  were  imple-
mented in the law related to electrical and electronic equipment and appliances. 
 
All  WilTec  electric  devices  that  fall  under  the  WEEE  regulations  are  labelled  with  the  crossed-out 
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the 
domestic waste. 
 
The  company  WilTec  Technik  GmbH  has  been  registrated  in  the  German  registry  EAR  under  the 
WEEE-registration number DE45283704. 
 
Disposal  of  used  electrical  and  electronic  appliances 
(intended  for  use  in  the  countries  of  the  European 
Union  and  other  European  countries  with  a  separate 
collection system for these appliances). 
The logo on the article or on  its packaging points out 
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion  point  for  electronic  and  electrical  waste  equip-
ment.  By  contributing  to  the  correct  disposal  of  this 
article  you  protect  the  environment  and  the  health  of 
your  fellow  men.  Environment  and  health  are  threat-
ened by inappropriate disposal. 
 
Materials’ recycling helps reduce the consumption of raw materials. 
 
Additional  information  on  recycling  this  article  can  be  provided  by  your  local  community,  municipal 
waste disposal facilities or the store where you purchased the article. 
 
 
 
 

Address: 

WilTec Wildanger Technik GmbH 

Königsbenden 12 / 28 

D-52249 Eschweiler 

 
 
 
 
 
 
 
 
 
 
Important notice: 
 
The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions 
manual require the written permission of WilTec Wildanger Technik GmbH. 
 

 

Summary of Contents for 34203









Reviews: