background image

  

© by WilTec Wildanger Technik GmbH  

Item 34204 

Page 2 

 

http://www.WilTec.

de

 

http://www.aoyue.eu   

   

07 2021

-1

 

http://www.teichtip.de

 

 
The information contained in this document may alter at any time without prior notice. No part of this 
document may be copied or otherwise duplicated without prior written consent. All rights reserved. 
WilTec  Wildanger  Technik  GmbH  cannot  be  held  liable  for  any  possible  mistakes  in  this  operating 
manual, nor in the diagrams and illustrations shown. 
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating 
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely. 
If you have found an error or wish to suggest an improvement, we look forward to hearing from you. 
Send us an e-mail to: 
 

service@wiltec.info

 

 
or use our contact form: 
 

https://www.wiltec.de/contacts/

 

 
The most recent version of this manual in several languages can be found in our online shop: 
 

https://www.wiltec.de/docsearch

 

 
 
Our postal address is: 
 
WilTec Wildanger Technik GmbH 
Königsbenden 12 
52249 Eschweiler Germany 
 
Do you wish to collect your goods? Our address for collection is: 
 
WilTec Wildanger Technik GmbH 
Königsbenden 28 
52249 Eschweiler Germany 
 
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to 
contact us briefly beforehand or to place your order via the webshop. 
 
E-mail: service@wiltec.info 
Phone: +49 2403 55592-0 
Fax: +49 2403 55592-15 
 
To  return  your  goods  for  exchange,  repair  or  other  purposes,  please  use  the  following  address. 
Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service 
team before returning your goods. 
 
Retourenabteilung 
WilTec Wildanger Technik GmbH 
Königsbenden 28 
52249 Eschweiler Germany 
 
E-mail: 

service@wiltec.info

 

Phone: +49 2403 55592-0 
Fax: (+49 2403 55592-15) 
 

 

Summary of Contents for 34204











Reviews: