© by WilTec Wildanger Technik GmbH
Item 61076
Page 4
06 2021
-1
Description of the device
Technical data
Type
M1W-DD16-115
Rated voltage
(V~)
230
–240
Frequency
(
㎐
)
50/60
Power consumption
(W)
710
Idle speed
(
stroke
⁄
min
)
0
–2500
Saw blade stroke
(
㎜
)
20
Insulation
Protection class II
Max. cutting depth (wood)
(
㎜
)
115
Accessories
1 × electric reciprocating saw
1 × saw blade 125 mm (for cutting wood)
1 × saw blade 85 mm (for cutting metal)
Weight
(
㎏
)
2.45
Information on reducing vibrations
Warning:
The actual existing vibration emission during the use of this device can be caused by the
following factors, which should be regarded before and during use:
•
Is the device used correctly?
•
Is the type of material processed correctly?
•
Is the condition of use of the device correct?
•
Are the handles/vibration handles mounted and are they tightened to the machine casing?
If you have an unpleasant feeling or notice a discolouration of the skin on the hands during the use of
the device, immediately stop working. Take sufficient work breaks. If work breaks are insufficient, a
hand-arm-vibration syndrome (HAVS) can occur.
An estimation should be made regarding the work and use of the machine and according breaks should
be taken. This way, the degree of strain during the entire work time can be reduced noticeably. Minimise
the risk of being exposed to vibration. Maintain the machine according to the instructions in this manual.
If the machine should be used more frequently, you should contact the seller for anti-vibrational equip-
ment.
Avoid the use of this machine with temperatures of 10
℃
or less. Create a work plan to reduce the strain
of the vibration on the operators.
Information on reducing noise
A certain amount of noise from this device is not avoidable. Schedule noise-intense work for hours and
places, which allow this. Comply to potentially existing hours of quietness and limit the work duration to
the maximum requirements. For personal safety and safety of people in close proximity, a suitable hear-
ing protection needs to be worn.
