Tool Use and Care
Do not force the tool to carry out work it was not designed for. Use the correct tool for the
work needing to be carried out.
The correct tool will work better and safer at a rate for which it
was designed.
Do not use the tool if the switch does not work properly.
Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
equipment or when storing the tool.
Such preventive safety measures reduce the risk of starting
the tool accidentally.
Store the tools out of reach of children and other untrained people.
Tools are dangerous in
the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with
sharp cutting edges are less likely to get stuck and therefore are easier to control.
Use the power tool, equipment and tool bits, etc.
in accordance with these instructions and
by taking the working conditions into account such as the work being carried out.
Using the
power tool for work other than the stated could result in a hazardous situation.
Servicing
The power tool needs to be serviced by a qualified person from an authorized service
partner using only original and identical parts.
This will ensure that the safety of the power
tool is maintained.
Additional Safety Instructions for the Electric Powerfile
Warning
Safety instructions for all future operations: Hold the power tool by its insulated gripping sur-
face, as the belt may contact its own cord. Cutting a “live” wire may expose metal parts of the
power tool and make them “live” and could lead to an electric shock.
Wear a dust mask whenever sanding. Thoroughly remove all dust after sanding. Take special care
when sanding paint which is possibly lead based or when sanding some woods and metals which may
produce toxic dust.
Wear a dust mask specifically designed for protection against lead paint dust and ensure that
people within or entering the work area are also protected.
Do not let children or pregnant women enter the working area.
Do not eat, drink or smoke within the work area.
Dispose dust particles and any other debris safely.
Before using the tool on wooden work pieces place the dust bag.
© by WilTec Wildanger Technik GmbH
Artikel 61117
Seite 5
http://www.WilTec.de
http://www.aoyue.eu
09 2020
-1
