IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS.
WARNING!
When using tools, basic precautions should always be followed.
WORK AREA
Keep the work area clean and well lit. Cluttered benches and dark areas increase risk of electric
shock, fire and injury to persons.
Do not operate tool in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust.
Keep bystanders, children and visitors away while operating the tool. Distractions may result in
personal injury and/or injury of others.
PERSONAL SAFETY
Always wear eye protection. Operator and others within work area should always wear approved
safety goggles with side shields. Eye protection is used to guard against flying fasteners and de-
bris, which may cause severe eye injury.
Always wear hearing protection when using the tool. Extended exposure to high intensity noise
may cause hearing loss.
Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the
applicable conditions.
Do not wear loose fitting clothing or jewelry. Use a helmet for long hair. These items can get
caught in moving parts, causing serious personal injury.
Stay alert, watch what you are doing and never operate the tool while being tired or under the in-
fluence of drugs, alcohol or medication. A moment of inattention while operating the tool increases
the risk of injury to persons.
Remove adjusting keys and wrenches before switching the tool on. A wrench or a key that is left
attached to a rotating part of the tool increases the risk of injury to persons.
Keep proper footing and balance at all times. Do not use on a ladder or an unstable support.
Proper footing and balance enable better control of the tool in unexpected situations.
Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of
balance or footing and may become damaged resulting in possible injury.
Do not attach the hose or tool to your body. Attach the hose to the structure to reduce the risk of
loss of balance if the hose shifts.
Avoid unintentional starting. Be sure the switch is off before connecting the air supply. Do not
carry the tool with your finger on the switch or connect the tool to the air supply when switched on.
Wash hands after handling.
© by WilTec Wildanger Technik GmbH
Seite 19
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
