Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make
the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for
bent, cracked or broken parts or any air leaks. If the tool has any damages, it must be repaired be-
fore being used again to avoid taking serious injuries.
Clean and check all air supply hoses and fittings before connecting the tool to an air supply. Re-
place any damaged or worn hoses or fittings. This will reduce tool performance or its durability.
Do not use the tool if it leaks air or does not function properly.
Do not operate the tool if it does not contain a legible warning label.
TOOL SERVICE
Use only accessories that are allowed by the manufacturer.
When servicing a tool, only use original spare parts.
Only use supplied lubricants specified by the manufacturer.
Tool service must only be performed by the manufacturer or an authorized service partner.
OPERATION
The amount of actual torque may vary depending on the cleanliness and condition of threads and
other factors.
The warnings and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. Always be aware and cautious while working with the tool.
Only use it with accessories that are rated to handle the forces exerted by this tool during opera-
tion. Other accessories which are not designed for the generated forces may break and forcefully
launch pieces.
Attach all accessories properly to the tool before connecting the air supply. A loose accessory may
detach or break during operation.
Obey the manual for the air compressor used with this power tool.
Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even
if a hose is ruptured.
Use this tool with both hands only. Using tools with only one hand can result in loss of control.
Do not lay down the tool until it has come to a complete stop. Moving parts can grab the surface
and pull the tool out of your control.
Always handle the tool with care:
o
Respect the tool as a working implement.
o
Never pull the trigger unless nose is directed toward the work.
o
Keep others in a safe distance from the tool while the tool is in operation as accidental ac-
tuation may occur possibly causing injury.
© by WilTec Wildanger Technik GmbH
Seite 21
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
