Security advise
Wear safety glasses.
Wear safety gloves.
Wear hearing protection.
Wear a dust mask.
In case of emergency, switch the machine off immediately and pull the plug.
Never operate the device in rain or snow.
To protect yourself, wear the recommended protective gear.
When working with the tile cutter, wear slim fitting clothing, solid shoes and a hairnet for
people with long hair.
Remove all jewellery, including rings.
Ensure that the machine is placed securely during the work process and the operator needs to
ensure to have a secure stand and to be able to keep his balance at all times.
Do not store any flammable or explosive liquids near the working area.
Do not remove any of the protective covers and do not touch any parts, which are located on
the inside or which can be hot.
Do not alter any basic motor or drive settings.
Always operate the machine from a protective socket.
Never carry the machine by its cable or move it whilst the engine is running.
Place the machine in a safe environment, where no walls, windows or other items can be hit,
in case pieces are launched.
Ensure a minimum distance during the working process between people, as these might get
hit and injured by flying pieces otherwise.
Do not allow children near the machine.
Do not technically alter the machine in any way.
Never touch the cutting disc when it is uncovered, and never touch it when it is spinning.
Do not use segmented cutting discs and always exchange a damaged disc immediately.
Ensure that the cutting disc is always spinning inside the water bath.
The disc will continue spinning after being switched off. Never try to make it slow down/stop
with your hands or any other item!
Do not operate the machine if you are under the influence of alcohol, drugs, or medecine.
Please read the package leaflet if you are unsure, whether the substances have any affect on
your perception. If in doubt, do not operate the machine.
Never let any electrical parts touch the water! This can cause serious injury.
Ensure that the machine stands on a solid, non-slip surface.
Attention!
The sound pressure level of this machine stated is a measured reference value.
This value can change during use as it is dependent on the environment the machine is used
in. Protect yourself and others adequately against noise on the basis of this value.
© by WilTec Wildanger Technik GmbH
Item 61285
Page 4
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1
