© by WilTec Wildanger Technik GmbH
Item 61288
Page 4
11 2021
-1
•
Only use the device at an angle below 90°.
•
Do not use the device during rain, wind, or other influences that complicate its use. Should the
gas flame be extinguished by wind, immediately close the gas knob.
•
Should you not manage to ignite the flame several times, close the valve and wait for the gas
escaped to have dissipated before you re-try to ignite the flame.
•
Should gas leak from the cylinder, this must immediately be brought to a well-ventilated place
free from sources of ignition. Make sure that all valves are closed.
Note!
One can recognise escaping gas by the typical gas smell. The odorous substance added
to the propane gas is similar to the smell of rotten eggs.
Warning! Risk to your health due to gas contact!
Escaping gas that is not ignited might
cause limited injuries when being inhaled or absorbed through the skin. Consult a doctor if
symptoms develop or if you have doubts.
•
Only qualified persons should perform repair works. Otherwise, there is a risk of gas leaks and
other risks.
•
Store the flaming device and the gas cylinder in a safe place and out of children’s reach. Make
sure that no gas escapes from cylinders. Do not store any flammable material, e.g., cardboard,
paper, or chipped wood, in the immediate vicinity of the flaming device. Make sure that the room
is well ventilated and protected from sunlight.
Attention!
This burner may only be used with HD 5 propane gas. The propane gas tank should not
contain more than 20 pounds LP gas. Do not use bulk containers with bigger capacities. Do not use any
other fuel.
Important!
To safely connect the burner to a current gas cylinder, you must
always
use a pressure
reducer that is not included in delivery.
