© by WilTec Wildanger Technik GmbH
Item 61908
Page 3
11 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety precautions
•
Before setting up the water dispenser, read the instructions and all notes and instructions therein
contained.
•
Check the delivery for completeness and intactness. If the column is damaged or if accessories
are missing, the column should not be assembled.
•
Only attach the column to a firm, stable, and load-bearing surface, e.g., on stone floor slabs or
a concrete base.
•
Ensure sufficient fastening using the fastening material included in the delivery.
•
Only pump water with the column. Never use it to transport chemicals, flammable liquids, etc.
•
Water contaminated with gravel, sand, or similar material can damage the column.
•
Make sure that there is no residual water in the column during frost. Empty it completely if nec-
essary.
Assembly
1.
Place the column on a suitable base. Align the holes in the foot in the desired position.
2.
Mark the places where the holes are located, put the column aside, and use a suitable drill to
drill fastening holes into the base.
3.
Fasten the column using the mounting material supplied.
4.
Connect the seals, connections, and water tap to the column as shown.
5.
Connect a water hose to the quick coupling at the bottom of the column to operate. By operating
the tap, the water is fed from the hose into the tap.
