The information contained in this document is subject to change without prior notice. No part of this
document can be copied or duplicated in another form without
the prior written consent of WilTec
Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in
this user manual or the connection diagram.
Although WilTec Wildanger Technik GmbH has made every effort to make sure that this user manual
is complete, accurate and updated, errors cannot always be avoided. In the event of problems with
this user manual please complete and send this form back to us.
FAX-notification (++
+49 2403 55592-15
),
from: ________________________________________
Name:
________________
Firm:
_____________________
Tel/Fax:
__________________
I would like to report the following mistakes:
_______________________________
____________________________________
Customer Service WilTec Wildanger Technik GmbH
e-mail:
Tel:++ +49 2403 55592-0
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury by means of fire or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can
find the corresponding mains voltage on the type plate. If you have any doubts about the
connection being grounded, have it checked by a qualified professional. Never use a
faulty electric cable.
Do not inspect the electrical part of the pressure pond filter in a wet or damp
environment or when you are wet yourself and protect it from direct sunlight. Install this
device in a safe location so that nobody can step on the cable, fall over or damage it.
Disconnect the power plug before cleaning it and use only a damp cloth for cleaning.
Avoid using cleaning agents and
make sure that no liquid enters the electrical part of the pump.
The electric part of the device contains no parts that can be inspected or serviced by the user. Leave
the maintenance, adjustment and repair to qualified technical personnel. In case of unauthorised
intervention the 2-year warranty is no longer valid! Keep these operation instructions safe.
© by WilTec Wildanger Technik GmbH
Seite 10
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
