© by WilTec Wildanger Technik GmbH
Item 34203
Page 3
05 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation
instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Caution!
•
The device may only be used with a residual current circuit breaker with a triggering rated
current of up to 30 mA (according to VDE 0100 parts 702 and 738).
•
This device may not be used by persons (including children) with limited physical, sensory or
mental capabilities or a lack of experience and/or knowledge, unless a person responsible for
their safety supervises them or have instructed them on how to use the device.
•
Children should be supervised to ensure that they do not play with the device.
Caution!
•
The compressor head (with cooling fins) can become very hot.
Risk of burns!
•
Visually inspect the device before each use. Do not use it if safety devices are damaged or
worn. Never override safety devices.
•
Only user this device in accordance with the intended use specified in this operation manual.
•
You are responsible for the safety in your work area.
•
Should the power cord or the plug be damaged due to external influences, the cable must not
be repaired, but must be replaced with a new one. This work may only be performed by a
qualified electrician.
•
The 230 V alternate voltage stated on the nameplate of the device must correspond to the
existing mains voltage.
•
Never lift, carry, or suspend the device by its power cord.
•
Make sure that the electrical plug connections are protected from flood and moisture.
•
Pull out the plug before any adjustment or maintenance work.
•
The user is responsible for the respect of local safety and installation regulations. Ask an
electrician in case of doubts.
•
In case of the device failing, repairs must only be carried out by a qualified electrician.
Notes!
•
The user should choose the right compressor with the appropriate air volume and pressure that
corresponds to the actual work requirements.
•
Never expose the device to dust, acids, steam, explosive or flammable gases, or the effects of
weather (rain, sun, fog, snow).
•
The vacuum pump may only be operated in a suitable environment (well ventilated, ambient
tempe5
–+40
℃
).
•
Never use the compressor barefoot or with wet hands or feet.
•
Never allow children to touch the switched-on compressor or plug in the plug. This could result
in burns or electric shock.
•
Do not open or damage any part of the compressor. If necessary, contact a qualified specialist.
•
The water can be drained by opening the drain valve. Always do this before you will not be using
the compressor for a long period of time. Store the compressor in a well-ventilated place.
•
Always wear protective glasses. Under no circumstances may the air flow be directed at
yourself, other people, or animals.
