© by WilTec Wildanger Technik GmbH
Seite 8
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
ATTENTION! Before lifting a load, make sure that you how to use this apparatus to know. The inaccu-
rate use can cause serious injury. All other uses are outlined here can be the damage to the appa-
ratus cause and be dangerous to use.
Safety application requirements
For safe use:
1. You use the mower lifts only for lifting.
2. Keep children away from lawnmowers Heber distant
3. do not let anyone approach the load because you are using the mower lift.
4. Never leave the mower lift unattended because you use this.
5. Never use the mower lift about his ability. An overload may damage the mower lift, and / or cause a
defect, causing serious injury.
6. The mower lift has been realized for a flat and hard ground. The use on a soft surface can cause
instability and can fall down the load
Always determine the load along or transverse reinforcement, which is located on the opposite side of
the Schwengeln screw. The load should always be placed horizontally are attached to the mower lift
not to damage and to prevent the load from sliding or fall down.
3. Always check the good effect from lawnmowers lifter before use. (Test only without load)
4. When it comes to a ride-on mower, make sure that the driver leave the seat has .
Image Overlay before use:
Assembly before use.
Position the jack on a lawnmower flat and stable surface
1. Expand the steel tube and fix three screws.
2. Install the handle and fix the screw.
3. Remove the locking peg.
4. Put the crankshaft upwards.
For a better use it is recommended to grease the screw before utilization.
