https://www.XPOtool.com
Item 34166
Page 4
The Tool Experts
04 2022-1
•
Make sure that the distance between the gun and surface stays constant.
6.
Switch off the compressed-air supply and let the pressure off as soon as you do not use the gun
any longer.
7.
Empty the paint cup after work. Drain the paint rests into an appropriate container and dispose
of it properly.
Cleaning and maintenance
•
Empty the paint cup and clean it out with water or dissolvent.
•
Fill water or dissolvent into the pain cup, then keep the needle holder shut by hand and spray.
Thus, the air will flow backwards into the nozzle, removing all paint rests.
•
It is advisable to spray again without keeping the needle holder shut to allow fresh dissolvent to
come into the paint conduct; then re-wash the dissolvent by keeping the needle cover shut by
hand. Repeat this several times if necessary.
•
Clean all components thoroughly to avoid any deposit.
Technical specifications
Nozzle diameter
(
㎜
)
0.2 / 0.3 / 0.5
Paint cup capacity
(mℓ)
3
Max. working pressure
(
㍴
)
3.4
Weight
(
㎏
)
0.3
