Edge Grinding
In order to facilitate the process of grinding edges, simply remove a part of the rotary disk cover.
Suction Settings
Exchanging Carbon Brushes
The device is delivered with a set of spare brushes that can be used to replace the pre-installed car-
bon brushes once they are worn out.
Please note:
The carbon brushes should always be replaced as
a set.
1.
Turn the device off and properly disconnect it from its power supply before beginning the ex -
change of the carbon brushes.
2.
Open the protective cover located at the top of the device with help of a socket head wrench
and remove the worn carbon brushes.
3.
Insert the spare carbon brushes into the designated slots and securely close the protective
cover.
https://www.XPOtool.com
Article 62830
Page 8
The Tool Experts
02 2021
-1