1-6
OPTIONS
The following options are available.
Option 1, Rack Mounting. Rack mount kit containing a set of
track slides (90
°
tilt capability), mounting ears, and front panel
handles for mounting the instrument in a standard 19-inch equip-
ment rack.
Option 2A, 110 dB Step Attenuator. Adds a 10 dB per step
attenuator with a 110 dB range for models having a high-end fre-
quency of
≤
26.5 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 2B, 110 dB Step Attenuator. Adds a 10 dB per step
attenuator with a 110 dB range for models having a high-end fre-
quency of
≤
40 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 2C, 90 dB Step Attenuator. Adds a 10 dB per step at-
tenuator with a 90 dB range for models having a high-end fre-
quency of
≤
50 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 2D, 90 dB Step Attenuator. Adds a 10 dB per step at-
tenuator with a 90 dB range for models having a high-end fre-
quency of
≤
60 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 9, Rear Panel RF Output. Moves the RF output connec-
tor to the rear panel.
Option 11, 0.1 Hz Frequency Resolution. Provides frequency
resolution of 0.1 Hz.
Option 14,
WILTRON
360B VNA Compatibility. Modifies rack
mounting hardware to mate unit in a
WILTRON
360B VNA con-
sole.
Option 15A, High Power Output. Adds high-power RF compo-
nents to the instrument providing increased RF output power in
the 2–26.5 GHz frequency range. Option 15A is standard in mod-
els having a high-end frequency that is >40 GHz.
Option 16, High-Stability Time Base. Adds an ovenized,
10 MHz crystal oscillator with <5 x 10
–10
/day frequency stability.
Option 17B, No Front Panel. Deletes the front panel for use in
remote control applications where a front panel display or key-
board control are not needed.
Option 18, mmWave Module Bias Output. Provides bias out-
put for 54000-xWRxx Millimeter Wave Source Modules. BNC Twi-
nax connector, rear panel.
GENERAL
INFORMATION
OPTIONS
680XXB OM
1-7
Summary of Contents for 680 B Series
Page 5: ......
Page 11: ...Figure 1 1 Series 680XXB Synthesized CW Generator...
