When the laptop connected to the projector, laptop required video
switch: Please use the original VGA cable to connect the notebook and
the projector, and the projector turned on, press the VGA button on the
remote control, or press the unit "Source" button, or the remote control
"Source" button, the projector is switched to VGA mode. Back to the
notebook side, press the switch key notebook "Fn + Fx", Fx represents
different models of notebook video switching keys F1-F10, similar to the
small TV icon. Press once the computer display, while the secondary is
pressed dual display, press three times the external display
(computer not shown). Since each brand of computer function key to
switch between different positions located, you control the following
according to your laptop's instructions to switch
Toshiba(Fn+F5) IBM(Fn+F7) HP(Fn+F4) Founder(Fn+F3)
samsung(Fn+F3) Panasonic(Fn+F3) NEC(Fn+F4) apple(Fn+F8)
sharp(Fn+F5) Hitachi(Fn+F7) Dell(Fn+F8) Acer(Fn+F5)
Lenovo(Fn+F3) BenQ(Fn+F7) ASUS(Fn+F9)
Win7 / Win8 system: Please use the original VGA cable to connect the
projector and notebook, then the projector is turned on, press the
machine "Source" button, or "Source" button on the remote control, the
projector will switch to VGA mode. Back side of the notebook, desktop,
right, screen resolution, connect the projector to display copy it.
computer equipment, connect the power cord or power adapter, turn
on the projector, press the "Source" button on the projector panel or
remote control, select the "PC (VGA)", press "OK" key to enter the
computer model, and then the computer's resolution setting and the
physical resolution of the projector consistent with the refresh rate
of 60Hz. (Actual use, most current computer systems do not support
800 * 480 resolution, this function is used to see the document class
will not see thefont, but for a computer to play images, pictures class
does not greatly affected).
8
Computer connection line
Laptop
Desktop
Computer
connection line
