42 Shower panel
WimTec OCEAN P10
EN
OCEAN P10
EN
Intelligent stagnation flush:
DIP switch 4
Description of the functions
Serves to rinse water supply lines in order to remove stagnant water that
accumulates during longer periods of non-usage.
DIP switch 4 ON = intelligent stagnation flush function activated
DIP switch 4 OFF = intelligent stagnation flush function deactivated (preset).
Time interval
Adjustable from 3–48 h
at the interval control
(see p. 29).
Intelligent stagnation flush
If the device has not been
used for the set period, the
rain shower’s intelligent
stagnation flush function is
executed for a maximum of
one and a half minutes. The
display shows ‘---’ during
the automatic flush.
Safety
If you are in the detection
range or if the cleaning stop
function is activated, the
automatic flush function will
not start until two minutes
after it has been deactivated
or you have left the detection
range. For five seconds before
and after the automatic flush,
the AquaCap button for the
rain shower
will flash.
3–48 h
max. 1.5 min
30–70 cm
ON
OFF
2
1
3 4 5 6
