Shower paneel
SanTec PROOF P4
21
EN
PROOF P4
Assembly: mains operation version
Art.Nr. 121 018
7.
Feed the connection cable into the installation space and
connect it to the power supply (art. no. 117 899 for 1 con-
trol or art. no. 113 792 for up to 5 controls).
Attention: The power must be switched off, and the
power supply must not be installed in the shower panel
or the protected zone!
8.
Configure the desired functions using the electronics
module (see p. 16).
9.
Hook the shower panel into the front bracket strap.
10.
Connect the flexible tubes and included valves to the
water inlets.
11.
Connect the power cables to the electronics module and
turn on the power (causing the safety locking mechanism
of the magnetic valve to activate).
8
10
9
7
11
+
-
ATTENTION!
Perform the following steps
in the order indicated!
!
