12
The FLS executes the command when the green LED is lit or flashing
(except with the FLS 2000 automatic system in the state “Programme off”).
When the window is closed, the display will only go out in the case of the
open/close system.
If you want to switch off the system because you will be away for a few
days and do not want any ventilation during this time, for example, then
press both buttons on the manual switch for 3 seconds.
In this state, the system is completely switched off and does not react any
more to commands from the remote control unit or the manual switch. The
display is dark. The window can only be opened completely in this state
(see chapter 5).
To switch the system back on again, see chapter 4.1 “Switching on the
system”.
Manual switch
3 seconds
FLS 2000 operating instructions
4.7
Switching off the system
