14
To close the window, correctly place the linkage in the holder again and
press the locking knob (3). The release lever (2) snaps up and fixes the
linkage in the holder.
Make sure that the linkage sits correctly in the
holder!
You might have to pull the release lever further up a little if a red
area is still visible at the top of the holder.
Next, press the service button (1) on the window actuator for 3 seconds
until the display reacts.
The FLS returns to the original state.
1
3
2
FLS 2000 operating instructions
5.2
Closing the window
