17
Display
State – cause – remedy
Window is wide open
In the unlocked state, it was acknowledged
that the linkage was correctly fixed in the
holder, but this was not the case.
Press the service button for 3 seconds until the
display goes out (window unlocking); push the
window shut; when both LEDs are alternately
flashing, fit the linkage correctly in the holder
and press the service button for 3 seconds
until the display reacts.
Blockage while opening or closing the window
1. Window fitting is stuck or
2. Mechanism of the FLS is defective
In both cases, our sales partner must be
contacted.
OR
7
Why is that not possible?
7.1
Display of malfunctions
Malfunctions of the FLS are displayed as follows:
