background image

 

12

 

Discrimination.  The  higher  the  sensitivity  level  is,  the  worse 
discrimination  will  be.  But  you  can  lower  the  sensitivity  to  have 
better discrimination. 

 
CARE AND MAINTENANCE 

Your  metal  detector  is  an  example  of  superior  design  and 
craftsmanship.  The  following  suggestions  will  help  you  care  for  your 
metal detector so you can enjoy it for years. 

 

    Handle the detector gently and carefully. Dropping it can   
    damage circuit boards and can cause the detector to work   

                      improperly. 
                   

Use the detector only in normal temperature     

      environments. Temperature extremes can shorten the life       

of  electronic  devices,  causing  internal  damage  to  the 
detector. 

           

      Keep the detector away from dust and dirt, which can   
      cause premature wear and tear of parts. 

 

      Wipe the detector with a damp cloth occasionally to keep   
      it looking new. Do not use harsh chemicals, cleaning   

                    solvents, or strong detergents to clean the detector. 
 
 
 
 
 

                                               

Summary of Contents for Pro Edition















Reviews: