Winchester TS12-30 Owner'S Manual Download

Page: 3 / 12

www.winchestersafes.com

Owner’s Manual

DELIVERY AND INSTALLATION

If you purchased your safe from a retailer and are having it delivered and installed, the

delivery company personnel will provide you with the proper instruction for the correct
operation of your safe. Pay very close attention to the operation of the lock. Make sure you
can comfortably operate the lock before they leave your home or office. After they have
shown you how to operate the lock, you should lock and unlock the safe several times
without any assistance from them. Once you are comfortable with this procedure, and can do
it consistently, you are now ready to operate your safe.

Your new safe left the factory in new condition and without damage. Inspect your new safe
for any damage prior to the delivery personnel leaving. Any damage claims at time of
delivery must be resolved with the delivery company and/or your retailer. Please do not
contact the factory.

If you purchased your safe and are doing your own delivery and installation, you must

read and follow these instructions. Safes are heavy and cumbersome and
there are risks associated with the untrained consumer doing their own delivery and
installation. We recommend that you use a professional safe installer, who is insured, and
will have the necessary equipment and training to safely and properly install your safe.

Packaging should have been removed and safe inspected for damage prior to accepting the

safe from your retailer. If your safe is damaged at this point, please contact your retailer. Do
not contact the factory.

.Verify that the Serial Numbers on the safe are the same as the one in this manual. Serial

Numbers are located on the bottom right side of the safe’s front and also on the upper part of
the inside door, near the locking bolts. In the unlikely event that all three serial numbers do
not match exactly, please contact theWinchester Safes Customer Service Department.