background image

3

OPM-135/C

 

  a well ventilated area.

 

F. Follow local codes for closeness to combustible 

   material.

3. DEADLY EXHAUST GAS - 

Exhaust fumes from any gasoline engine contain carbon 

monoxide, an invisible, odorless and deadly gas that must 

be mixed with fresh air.

 

A. Operate only in well ventilated areas.

 

B. Never operate indoors including attached garages

 

C. Never operate the unit in such a way as to allow 

 

  exhaust gases to seep back into closed rooms (i.e. 

 

  through windows, walls, floors).

4. NOISE HAZARD - 

Excessive noise is not only tiring, but continual exposure 

can lead to loss of hearing.

 

A. Use hearing protection when working around this 

 

  equipment for long periods of time.

 

B. Keep your neighbors in mind when using this 

   equipment.

5. CLEANLINESS - 

Keep the generator and surrounding area clean.

 

A. Remove all grease, ice, snow or materials that create 

 

  slippery conditions around the unit.

 

B. Remove any rags or other materials that could create 

 

  a  potential fire hazard.

 

C. Carefully clean up any gas or oil spills before starting 

 

  the unit.

6. SERVICING EQUIPMENT -

All service, including the installation or replacement of 

service parts, should be performed only by a qualified 

technician.

 

A. Use only factory approved repair parts.

 

B. Do not work on this equipment when fatigued.

 

C. Never remove the protective guards, covers, or 

 

  receptacle panels while the engine is running.

 

D. Use extreme caution when working on electrical 

 

  components. High output voltage from this 

 

  equipment can cause serious injury or death.

 

E. Always avoid hot mufflers, exhaust manifolds, and 

 

  engine parts. They can cause severe burns instantly.

 

F. The use of the engine-generator set must comply 

 

  with all national, state, and local codes.

SAFETY INFORMATION

This engine generator set has been designed and 

manufactured to allow safe, reliable performance. Poor 

maintenance, improper or careless use can result in 

potentially deadly hazards; from electrical shock, exhaust 

gas asphyxiation, or fire. Please read all safety instructions 

carefully before installation or use. Keep these instructions 

handy for future reference. Take special note and follow all 

warnings on the unit labels and in the manuals.

CALIFORNIA PROPOSITION 65

WARNING: This product contains crude oil, 

gasoline, diesel fuel and other petroleum 

products, Antifreeze to which can expose you 

to chemicals including toluene and benzene, 

Ethylene glycol (ingested) which are known to 

the State of California to cause cancer, birth defects or other 

reproductive harm and developmental issues. 

For more information go to www.P65Warning.ca.gov.

ANSI SAFETY DEFINITIONS

DANGER:

DANGER indicates an imminently hazardous situation 

which, if not avoided, will result in death or serious injury. 

This signal word is to be limited to the most extreme 

situations.

WARNING:

WARNING indicates a potentially hazardous situation 

which, if not avoided, could result in death or serious injury.

CAUTION:

CAUTION indicates a potentially hazardous situation which, 

if not avoided, may result in minor or moderate injury. It 

may also be used to alert against unsafe practices.

1. ELECTRICAL SHOCK -

The output voltage present in this equipment can cause 

fatal electric shock. This equipment must be operated by a 

responsible person.

 

A. Do not allow anyone to operate the generator 

 

  without proper instruction.

 

B. Guard against electric shock.

 

C. Avoid contact with live terminals or receptacles.

 

D. Use extreme care if operating this unit in rain or 

   snow.

 

E. Use only three-pronged grounded receptacles

 

  and extension cords.

 

F. Be sure the unit is properly grounded to an

 

  external ground rod driven into the earth.

2. FIRE HAZARD - 

Gasoline and other fuels present a hazard of possible 

explosion and/or fire.

 

 

A. Do not refuel when the engine is running or hot.

 

B. Keep fuel containers out of reach of children.

 

C. Do not smoke or use open flame near the generator 

 

  set or fuel tank.

 

D. Keep a fire extinguisher nearby and know its proper 

 

  use. Fire extinguishers rated ABC by NFPA are 

   appropriate.

 

E. Store fuel only in an approved container, and only in 

Summary of Contents for DR20I4-/1 Series





















Reviews: