background image

10

Service and Repair

There are no user serviceable parts within this appliance.  

To avoid serious injury or damage, 

NeveR

 attempt to repair the unit 

yourself.
To initiate warranty service contact: support@wincous.com 

or call: 973-295-3899.
DO NOT send unit to WINCO without first contacting our customer 

service department.
See "Limited Warranty" section on page 11 for details.

If your WINCO appliance does not operate, please check the following prior to placing a service call.

Safety

A WINCO® Approved Service Technician should carry out repairs 

if necessary. Do not remove any components or service panels on 

this product.
If the power cord is damaged, it must be replaced by a WINCO 

Approved Service Technician in order to avoid a hazard.

Troubleshooting

pRoblem

mIGht be cAused by

couRse of ActIoN

Unit will not heat

Power supply

Check power source & make sure unit is plugged in

Thermostat setting incorrect

Make sure thermostat is turned to desired setting

Water level incorrect

Make sure well pan has correct amount of water

Plug/cord, set or external wiring is damaged

Call Winco to make service arrangements through 

their service provider network

Internal wiring fault

Food remains cold, not reaching desired 

temperature

Operation of thermostat

Ensure thermostat is set correctly and that the heat 

control knob is firmly secured to the thermostat 

shaft (not spinning independently)

Faulty thermostat

Call Winco to make service arrangements

Indicator light is not on but the unit is 

heating up

The indicator bulb has burned out

Call Winco to make service arrangements

Product exceeds desired temperature

Faulty heating elements

Call Winco to make service arrangements

Wrong setting of thermostat

Ensure thermostat is set correctly and that the heat 

control knob is firmly secured to the thermostat 

shaft (not spinning independently)

Faulty thermostat

Call Winco to make service arrangements

Appliance trips circuit breaker  

or blows fuse

Circuit overload

Check to make sure circuit is not overloaded

Blown fuse

Unplug from power and check for short circuits

Faulty thermostat

Call Winco to make service arrangements

Summary of Contents for FW-L600













Reviews: