Page 4 of 32
Document No.: 006335
Revision: K
OWNERS OPERATING & MAINTENANCE MANUAL
INVERNESS 24-HOUR TREATMENT RECLINER™
INTENDED USE STATEMENT
The Inverness 24-Hour Treatment Recliner is a recliner for use in medical settings. It is designed to
provide comfort for patients seated up to eight (8) hours at a time while receiving treatments such
as Dialysis or Infusion or during recovery from surgical procedures where positional adjustments are
beneficial. The recliner is also suitable for general use in many medical settings such as, but not limited
to, hospital room chair, waiting room chair, convalescent home chair, etc.
TRANSPORTATION, STORAGE, HANDLING & DISPOSAL
•
The product should be transported in factory packaging, inside an appropriate medium for the
destination, i.e., air/sea cargo containers.
•
The product should be stored in an environment that will inhibit rust/mold formation.
•
Winco Mfg., LLC recommends not leaving the product in the factory packing in excess of three (3)
months.
•
The product should always be handled in a manner consistent with the user instructions and in a
manner to prevent contamination after each use.
•
The product has many recyclable components and to the extent practical, all effort should
be used to recycle responsibly. Otherwise the product components shall be disposed of in
accordance with local statutes.
PREPARATION: BEFORE YOU BEGIN
1.
Carefully examine your product for any damage. Be sure to inspect all components.
IF DAMAGE IS EVIDENT, CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY.
2.
Remove all packaging material and any hardware that was secured for shipping.
3.
Carefully remove all components and any included tools and/or parts from the carton.
4.
You may need to cut packaging materials with a box cutter or scissors to access the product. Use
CAUTION
to avoid personal injury or damage to the product.
5.
Save all boxes and packaging material until
AFTER
you have assembled your product and have
verified that all components are functioning properly. These material are required if it becomes
necessary to return the product.
6.
DO NOT
install, maintain or operate this equipment without reading and following this manual
otherwise injury and/or damage may result. I
F YOU HAVE QUESTIONS OR CONCERNS PLEASE
CONTACT WINCO MFG., LLC.
WINCO ASSUMES NO RESPONSIBILITY FOR DAMAGE OR INJURY CAUSED BY IMPROPER ASSEMBLY,
INSTALLATION, USE, OR MAINTENANCE OF THESE PRODUCTS.
