OWNERS OPERATING & MAINTENANCE MANUAL
TMM3 VIDEO FLUOROSCOPY STRETCHER-CHAIR
Page 4 of 28
Document #OM-TMM-2228-13
Revision: V
INTENDED USE STATEMENT
TMM3 Stretcher-Chairs are intended for use in patient treatment, transport and/or recovery within a
hospital, clinic, same-day/ambulatory surgery center, or similar environment.
The pendant control is
NOT INTENDED FOR PATIENT USE.
A surgeon and/or clinician must always rely on his or her own clinical knowledge when deciding whether
to use a TMM3 Stretcher-Chair when treating a patient.
TRANSPORTATION, STORAGE, HANDLING & DISPOSAL
•
The product should be transported in factory packaging, inside an appropriate medium for the
destination, i.e., air/sea cargo containers.
•
The product should be stored in an environment that will inhibit rust/mold formation.
•
Winco Mfg., LLC recommends not leaving the product in the factory packing in excess of three (3)
months.
•
The product should always be handled in a manner consistent with the user instructions and in a
manner to prevent contamination after each use.
•
The product has many recyclable components and, to the extent practical, all effort should
be used to recycle responsibly. Otherwise the product components shall be disposed of in
accordance with local statues.
PREPARATION: BEFORE YOU BEGIN
Carefully examine your product for any damage. Be sure to inspect all components.
1. IF DAMAGE IS EVIDENT, CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY.
2. Remove all packaging material and any hardware that was secured for shipping.
3. Carefully remove all components and any included tools and/or parts from the carton.
4. You may need to cut packaging materials with a box cutter or scissors to access the product. Use
CAUTION to avoid personal injury or damage to the product.
5. Save all boxes and packaging material until AFTER you have assembled your product and have
verified that all components are functioning properly. These material are required if it becomes
necessary to return the product.
6. DO NOT install, maintain or operate this equipment without reading and following this manual
otherwise injury and/or damage may result. IF YOU HAVE QUESTIONS OR CONCERNS PLEASE
CONTACT WINCO MFG., LLC.
WINCO ASSUMES NO RESPONSIBILITY FOR DAMAGE OR INJURY CAUSED BY IMPROPER
ASSEMBLY, INSTALLATION, USE, OR MAINTENANCE OF THESE PRODUCTS.
