WMP-248/249 User’s manual
11
Cleaning/Disinfecting
Steps:
1. Wipe the WMP-248/249 with a dry clean cloth.
2. Prepare agent per manufacturer’s instructions or hospital
protocol.
Cautions:
Do not immerse or rinse the WMP-248/249 and its
peripherals. If you accidentally spill liquid on the device,
disconnect the unit from the power source. Contact your
Biomed regarding the continued safety of the unit before
placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the WMP-248/249 or its
peripherals with strong aromatic, chlorinated, ketone, ether,
or Esther solvents, sharp tools or abrasives. Never immerse
electrical connectors in water or other liquids.
