18
Installing System Software
Recent releases of operating systems from major vendors include
setup programs, which load automatically and guide you through
hard disk preparation and operating system installation. The
guidelines below will help you determine the steps necessary to
install your operating system on the Panel PC hard drive.
NOTE:
Some distributors and system integrators
may have already pre-installed system
software prior to shipment of your Panel PC.
Installing software requires an installed HDD. Software can be
loaded in the WTP-8865 Panel PC using any of below methods:
Method 1: Use the Ethernet
You can use the Ethernet port to download software from the
net to the HDD that has been pre-installed in
WTP-8865 Panel
PC
Method 2: Use the COM Port
By connecting another PC to the
WTP-8865 Panel PC
with an
appropriate cable, you can use transmission software to
transmit Operation System Software to the HDD that has been
pre-installed in the
WTP-8865 Panel PC
.
Method 3: Use a External CD-ROM
In order to boot up system from USB-CD/DVD drive, please
connect USB-CD/DVD drive, turn on computer power, keep on
pressing “F11” key, go into BIOS quick boot menu, select
“USB-CD ROM”, WAIT FOR 20 SECONDS, then press enter,
system OS will boot up from USB-CD/DVD drive directly
Summary of Contents for WTP-8865 series
