25
Time
The time format is:
Hour :
00 to 23
Minute :
00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/
<PgDn> or +/- keys to set the current time.
IDE Channel Master/Slave
The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks. Each
channel can support up to two hard disks; the first is the “Master”
and the second is the “Slave”.
Press <Enter> to configure the hard disk. The selections include
Auto, Manual, and None. Select ‘Manual’ to define the drive
information manually. You will be asked to enter the following
items.
Capacity:
Capacity/size of the hard disk drive
Cylinder:
Number of cylinders
Head:
Number of read/write heads
Pre comp:
Write pre compensation
Landing Zone:
Landing zone
Sector:
Number of sectors
The Access Mode selections are as follows:
Large
(for MS-DOS only)
Auto
Summary of Contents for WTP-8865 series
