26
Remarks
: The main board supports 4 serial ATA ports and are
represented in this setting as IDE Channel 2.
Video
This field selects the type of video display card installed in your
system. You can choose the following video display cards:
EGA/VGA
For EGA, VGA, SEGA, SVGA
or PGA monitor adapters. (default)
CGA 40
Power up in 40 column mode.
CGA 80
Power up in 80 column mode.
MONO
For Hercules or MDA adapters.
Halt On
This field determines whether or not the system will halt if an error
is detected during power up.
All errors
Whenever the BIOS detect a non-fatal error, the
system will stop and you will be prompted.
No errors
The system boot will not be halted for any error that
may be detected.
All,But
Keyboard
The system boot will not be halted for a keyboard
error; it will stop for all other errors
Summary of Contents for WTP-8865 series
