15
Enable/Disable onboard HD audio.
Front Panel
Select Front Panel Type.
Onboard HDMI HD Audio
Enable audio for the onboard digital outputs
Onboard LAN 1
Enable or disable the onboard network interface controller.
Onboard LAN 2
Enable or disable the onboard network interface controller.
Deep S5
Select System deep S5 configuration. 'Auto' will disable the deep S5 configuration if RTC/LAN/USB
device power on settings enabled.
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will remain off when
the power recover. If [Power On] is selected, the system will start to boot up when the power recovers.
Storage Configuration
Configure Storage devices.
SATA Controllers(s)
Enables/disable the SATA controllers.
SATA Mode Selection
IDE: For better compatibility.
AHCI: Supports new features that improve performance.
SATA Aggressive Link Power Mgmt
SATA Aggressive Link Power Management allows SATA devices to enter a low power state during
periods of inactivity to save power. It is only supported by AHCI mode.
Hard Disk S.M.A.R.T
S.M.A.R.T stands for self-Monitoring, Analysis, and Reporting Technology, It is a monitoring system for
computer hard disk drives to detect and report on various indicators of reliability.
SATAII_1
External SATA
Enable SATA safe removal notifications. Please note that the SATA device will be downgraded to
SATA2.
Hot Plug
Enable or disable Hot Plug for this port.
SATAII_2
External SATA
Enable SATA safe removal notifications. Please note that the SATA device will be downgraded to
SATA2.
Hot Plug
Enable or disable Hot Plug for this port.
Intel(R) Smart connect Technology
Intel(R) Smart Connect Technology Settings.
Intel(R) Smart Connect Technology
Intel(R) Smart connect Technology automatically updates your email and social networks, Such as
Twitter, Facebook, etc. While the computer
Super IO Configuration
Configure Super IO Settings.
COM1 Configuration
Set Parameters of COM1
Serial Port
Enable or Disable Serial Port (COM)
Type Select
Set COM TYPE.
COM2 Configuration
Set Parameters of COM1
Serial Port
Enable or Disable Serial Port (COM)
