Basic Operation
9 BEETLE iDOT POS System
–
Operating Manual 01750098309 A
BASIC OPERATION
Before switching on the device
Unpacking and checking the device
Unpack the parts and check to see whether the delivery matches the information
on the delivery note.
The delivery contains the basic unit and country-specific accessories.
If damage has occurred during shipping or if the package contents do not match
the delivery note, promptly inform your Wincor Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against impact and
shock).
Setting up the device
Set up the BEETLE iDOT POS system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust, moisture, heat
and strong magnetic fields.
If the device is to be fitted, ensure that the specified minimum distances are
maintained and constant ventilation is provided. The minimum distance upwards
is 10mm. The immediate ambient temperature of the system must not exceed
40°C / 104 °F. These requirements are met, for example, if the equipment is not
built into an enclosed piece of furniture.
Cabling
Always make sure that the system is switched off when you do cabling works.
Never unplug a cable by pulling the cable but take hold of the actual plug
itself.
