Manufacturers Certification
3 BEETLE iDOT POS System
–
Operating Manual 01750098309 A
Important notes
This device conforms to the corresponding safety regulations for information
technology devices, including electronic office machines for use in the office
environment.
If the device is moved from a cold environment to a warmer room where it is
to be operated, condensation may form. The device must be completely dry
before being put into operation. Therefore an acclimatization time of at least
two hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device and
the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off the
device and disconnect the power plug.
Whenever work of any kind is done on the device, as well as when data
cables are plugged and unplugged, the device must be completely
disconnected from the line voltage. To do so, turn the device off and unplug
the power cord.
Protect the device from vibrations, dust, moisture and heat.
Never plug or unplug data communication lines during thunderstorms.
Ensure that no foreign objects (e.g. paper clips) or liquids find their way into
the device, as this may lead to electrical shocks or short circuits.
If liquids were spilled over your BEETLE /iDOT switch off the system and
disconnect the power plug. Dry the device with a cloth and leave it switched
off for a while.
Always dispose used parts in an environmentally safe manner.
In case of emergencies (e.g. damaged housing or damaged power cable,
penetration by liquid or foreign objects), the device must be switched off
immediately, the power plug should be disconnected and the Wincor Nixdorf
customer service or your dealer must be notified.
